Author Topic: GOOD SCHOOL FOR SHORT TECHNICAL COURSES.... ASAP please!!!  (Read 125999 times)

Clarisa

  • GirlTalker
  • **
  • Posts: 145
Re: GOOD SCHOOL FOR SHORT TECHNICAL COURSES.... ASAP please!!!
« Reply #180 on: April 10, 2010, 05:05:22 pm »
hello mga sis.. may alam ba kau na training for SAP and how much thanks

L e i L a

  • GirlTalker
  • **
  • Posts: 79
Re: GOOD SCHOOL FOR SHORT TECHNICAL COURSES.... ASAP please!!!
« Reply #181 on: June 14, 2010, 07:10:32 pm »
I just finished a short course in MFI. sulit talaga sila dun, kaya thank you sa mga nagsuggest. :) Practice practice ako ngayon nga, para di masayang ang inaral. Haaay, hinayang tuloy ako dun sa informatics ko dati, almost the same rate, pero ang quality nevermind. :P

Gusto ko sana mag-MFI pa ulit for a php&sql class, kaso di tugma sa sched ko. Meron din sa UP ITTC, pero maayos kaya sila dun? iniisip ko kasi kung hands-on din training like sa mfi. Feedback please, mga sis. TIA! :)
One must learn to take the good with a little grace, the bad with a little hope, and the ugly with a little humor.

spartan

  • an Hero
  • GirlTalker
  • **
  • Posts: 131
  • Oh Hai guise
    • Philippines Design - Pinoy Blog
Re: GOOD SCHOOL FOR SHORT TECHNICAL COURSES.... ASAP please!!!
« Reply #182 on: July 29, 2010, 08:27:39 am »
I took an advance PHP class at UP ITTC and was not happy with the training.

Trainer comes in 15-30 minutes. Gives basics, then leaves you the whole day to figure it out yourself :(

iceylicious

  • Junior GirlTalker
  • ***
  • Posts: 265
Re: GOOD SCHOOL FOR SHORT TECHNICAL COURSES.... ASAP please!!!
« Reply #183 on: August 10, 2010, 10:50:26 am »
I took an advance PHP class at UP ITTC and was not happy with the training.

Trainer comes in 15-30 minutes. Gives basics, then leaves you the whole day to figure it out yourself :(

ay ganun, plan ko pa naman mag enroll sa UP yung mga short courses nila, kaya lang naisip ko baka kulang yung 1 wk. na class at baka naman sobrang bilis mag turo ng mga prof..

full time course kaya ng UP ok kaya yun??

samsung

  • GirlTalker
  • **
  • Posts: 146
Re: GOOD SCHOOL FOR SHORT TECHNICAL COURSES.... ASAP please!!!
« Reply #184 on: August 10, 2010, 10:58:43 am »
try: [Hands-on Training for Website, Graphic Designing, Video Editing and Networking]

http://tipidpc.com/viewitem.php?iid=6744702

Gusto kong itry to, pero walang pera pa saka wala pang time. this year!

:)

iceylicious

  • Junior GirlTalker
  • ***
  • Posts: 265
Re: GOOD SCHOOL FOR SHORT TECHNICAL COURSES.... ASAP please!!!
« Reply #185 on: August 10, 2010, 11:07:32 am »
may nakapagtake na ba ng classes sa microcadd? what's the feedback? gusto ko sana itry

up.. up!!

 ano maganda course na pwede itake dito?

spartan

  • an Hero
  • GirlTalker
  • **
  • Posts: 131
  • Oh Hai guise
    • Philippines Design - Pinoy Blog
Re: GOOD SCHOOL FOR SHORT TECHNICAL COURSES.... ASAP please!!!
« Reply #186 on: August 10, 2010, 01:24:54 pm »

full time course kaya ng UP ok kaya yun??

I've heard good stuff from the 1 year certification course. Full time yun. Usually japan destination after graduation.

marshierroLs

  • Probationary
  • Posts: 9
Re: GOOD SCHOOL FOR SHORT TECHNICAL COURSES.... ASAP please!!!
« Reply #187 on: October 23, 2010, 01:37:55 am »
i'm planning to take short course on adobe photoshop on MFI...for business purposes...would inquire next week..sana meron tugma ng schedule ko...  ;)

thanks sa mga recommendations...it really helps na may thread like this  ;D

L e i L a

  • GirlTalker
  • **
  • Posts: 79
Re: GOOD SCHOOL FOR SHORT TECHNICAL COURSES.... ASAP please!!!
« Reply #188 on: November 16, 2010, 07:40:57 am »
okay yung mga graphic design classes ng MFI.

pero i wouldn't recommend a certain web dev't course, or baka sa instructor lang din talaga :P
One must learn to take the good with a little grace, the bad with a little hope, and the ugly with a little humor.

cecilydee

  • Junior GirlTalker
  • ***
  • Posts: 364
  • that's the way we do the varsity drag
    • Freshness Indeed!
Re: GOOD SCHOOL FOR SHORT TECHNICAL COURSES.... ASAP please!!!
« Reply #189 on: May 05, 2011, 09:35:53 pm »
^which web devt course are you referring to sis? kasi im planning to take their dreamweaver course. sayang naman kung hindi ok ang instructor. :S
∴∴∴∴→→★Life. Beauty. Crafting. Freelance. Watermelons. ★←←∴∴∴∴

L e i L a

  • GirlTalker
  • **
  • Posts: 79
Re: GOOD SCHOOL FOR SHORT TECHNICAL COURSES.... ASAP please!!!
« Reply #190 on: May 19, 2011, 10:06:04 am »
^ sis, no complaints ako sa dreamweaver course ng mfi. i can recommend a good instructor there if you like :)
One must learn to take the good with a little grace, the bad with a little hope, and the ugly with a little humor.

red_one

  • mrs.architect
  • Junior GirlTalker
  • ***
  • Posts: 224
Re: GOOD SCHOOL FOR SHORT TECHNICAL COURSES.... ASAP please!!!
« Reply #191 on: September 15, 2011, 11:21:18 am »
up.. up!!

 ano maganda course na pwede itake dito?

ok naman sa microcadd. my mga branches naman sila sa mga mall. yung course depende kung san ka interested, or kung ano mas related sa profession mo.  pag nag-enrol ka dun, my free hands-on dun. and pede ka rin mag-sit-in kahit tapos tapos mo na i-take yung course mo.
my mga discounts din on your next course.

smiles_alwayz

  • was numb and lost... then i was found... and fell in love in New zealand
  • GirlTalker
  • **
  • Posts: 137
  • Love to Love
Re: GOOD SCHOOL FOR SHORT TECHNICAL COURSES.... ASAP please!!!
« Reply #192 on: October 28, 2011, 12:08:47 am »
hi all,

i just went to 4 diff schools which offer short courses and i would like to share my experience:

SB negotech - kaka-enroll ko lang ng photoshop every fri 8am-12nn (nov-feb 2010). 400pesos lang.

PUP quezon city - nakita ko sa internet na may SAP sila dati pero wala na ngayon

philippine center for creative imaging or PCCI - ang isang session naglalaro sa 2+++. parang hindi ito advisable sa baguhan... kasi kung isang araw lang ituturo sayo at walang follow-up, hindi magiging effective.... feeling ko mas okay to kung may background ka na talaga sa fundamentals...

UP ITTC - sabi ng guard, tuwing saturday lang sila nag-eentertain ng mga gustong mag-inquire personally kaya nasayang lang ang pagpunta ko dun.

meralco foundation - mag-eenroll din ako dito bukas... mababait ang mga frontdesk...hindi sila masungit... kung hindi nila alam ang tanong mo, irerefer ka nila sa IT dept. yung IT instructor na nag-assist sa kin very accommodating sa questions.


Ex w/ Benefits   (Derek Ramsey & Colleen Garcia)
Thoughts of Adam
"Minsan kailangan mong masaktan para maramdaman mong buhay ka pa.?

pinkk

  • Life's a beach, ride with the waves~
  • Senior GirlTalker
  • ****
  • Posts: 548
    • http://www.youtube.com/watch?v=Xj7UaG03Zgg&feature=related
Re: GOOD SCHOOL FOR SHORT TECHNICAL COURSES.... ASAP please!!!
« Reply #193 on: March 30, 2012, 05:01:44 pm »
any new updates for 2012 short courses?

grace.kelly

  • Senior GirlTalker
  • ****
  • Posts: 868
Re: GOOD SCHOOL FOR SHORT TECHNICAL COURSES.... ASAP please!!!
« Reply #194 on: April 11, 2012, 07:56:52 pm »
Gusto ko sana short courses for 3ds max, maya, and autocad, can anyone recommend a good school? So far nasa list ko ay Microcadd Technologies, iCad and De Lasalle School of Professional and Continuing Education. Any feedbacks for these schools? I'm torn kasi between iCad and Microcadd, yung sa De Lasalle kasi ang hirap i-contact hindi tuloy malaman kung may available sched nga sila. Ayoko rin kasi yung mga tipong 6 months, sana for a short time.  ;D
If it's still in your mind, it's worth taking the risk.
If you want something you never had, you have to do something you've never done!

bratty

  • Super GirlTalker
  • *****
  • Posts: 1014
Re: GOOD SCHOOL FOR SHORT TECHNICAL COURSES.... ASAP please!!!
« Reply #195 on: April 12, 2012, 01:22:21 pm »
Thanks sa mga suggestions dito. I might take short courses pag uwi ko, sana maganda ang skeds.
Everyday I'm shufflin'

purplecharm

  • Probationary
  • Posts: 1
Re: GOOD SCHOOL FOR SHORT TECHNICAL COURSES.... ASAP please!!!
« Reply #196 on: April 27, 2012, 10:32:40 pm »
hi mga sis! i'm not a regular poster here, but a regular lurker.. sorry about that!  :(

i find this forum so helpful.. thank God i've come to find this one.. i'm a nursing grad, but i want to start a career in IT. what short course should i take first? gusto ko sana magwork as database administrator.. baka you guys can help me out. anong short courses dapat kong i-take (in order)? TIA!

mukang ok feedback sa sb negotech at MFI, i want to give either of them a try...

PS: wala akong background sa IT.. :(
« Last Edit: April 27, 2012, 10:51:06 pm by purplecharm »

AnyaRain

  • Coffee Addict
  • Probationary
  • Posts: 8
  • Kape Pa!!!
Re: GOOD SCHOOL FOR SHORT TECHNICAL COURSES.... ASAP please!!!
« Reply #197 on: June 02, 2012, 02:05:37 pm »
^ pwede ata ang Programming na short course, kung short course lang talaga ang kukunin mo

may nakita kasi ako sa internet na subjects na pwede mong ma-tackle pag programming ang kinuha mo
eto yung link http://www.courses.com.ph/programming-nc-iv-tesda-course-philippines/

kaya lang depende pa rin siguro yun sa school..

jepoy22

  • GirlTalker
  • **
  • Posts: 89
Re: GOOD SCHOOL FOR SHORT TECHNICAL COURSES.... ASAP please!!!
« Reply #198 on: June 04, 2012, 12:51:58 am »
i don't know if it has been suggested in this thread, but for short courses, UP ITDC (Formerly UP ITTC) is offering short courses for IT related subjects like C#, Object Oriented Development, etc.

I don't know what has changed in it, but i did graduate in its 1-year intensive IT program 4 years ago, before entering my current job. (the short courses are 1~2wk courses i think)

search nyo na lang sa google for details :)

red_one

  • mrs.architect
  • Junior GirlTalker
  • ***
  • Posts: 224
Re: GOOD SCHOOL FOR SHORT TECHNICAL COURSES.... ASAP please!!!
« Reply #199 on: June 07, 2012, 03:15:05 pm »
Gusto ko sana short courses for 3ds max, maya, and autocad, can anyone recommend a good school? So far nasa list ko ay Microcadd Technologies, iCad and De Lasalle School of Professional and Continuing Education. Any feedbacks for these schools? I'm torn kasi between iCad and Microcadd, yung sa De Lasalle kasi ang hirap i-contact hindi tuloy malaman kung may available sched nga sila. Ayoko rin kasi yung mga tipong 6 months, sana for a short time.  ;D

sis, Microcadd is okay. reasonable yung price nila, and accredited sila ng Tesda. I took two courses na sa microcadd, autocad and 3dmax.

 


Latest Stories

Load More Stories
Close